Price: ₹4,500 - ₹3,319.00
(as of Jan 18, 2025 04:38:08 UTC – Details)
The working principle of automatic crdle device is to lengthen the spring with the weight of the baby and the cradle, and drive the cradle to rise by the elasticity of the spring, so the number of needs to be installed strictly in accordance with the actual weight, otherwise it can not be adjusted to the best swing speed frequency. The speed adjustment knob of the control host machine adjusts the speed and frequency of the motor runner driving the rope to lift, and provides the power for the cradle to swing up and down repeatedly, not the taxed speed in a txed gear position. Each spring can load 3kg, a total of 5 springs, according to the weght of the number of springs, the corresponding position.
Components Included: 1 Motor Unit 5 Springs (Different Load Bearing Capacities) 2 Hooks 3 Nylon Ropes 1 AC/DC Adaptor (100 to 240V AC) and 100-inch Wire
Load Bearing of Spring: .Two Spring: 3-6kg. Three Spring: 6-9kg. Four Spring: 9-12kg. Five Spring: 12-15kg
Spring Installation: The position can be balanced left and right. Regularly check installation accessories; replace them if damaged. Mount pull actor with shelf or roof. Do not hang the motor upside down. Hanging empty cradle should be about 60cm from the ground
Timer Functionality: The timer can be set up to 4 hours. Each click increases the timer by one hour
Warnings: if you face any difficulty while installing the Automatic spring device, please contact our customer support. our contact details are given on the box and in the manufacturer details area.
Special Features: Output indicator.Power indicator.Timing display and button.Power switch.Music and speed knobs.Tensioner section for adjustment
